-
Elizabeth Grace CampbellExcellent quality, durable brake drums that exceeded my expectations. Fit perfectly and stopped the truck smoothly. -
Matthew Thomas SullivanThese brake drums are built tough, no warping after heavy use. Fantastic product and fast shipping too.
Product Overview
The MC818231 brake wheel cylinder is an aftermarket replacement for the right side of the front axle on selected Mitsubishi Fuso FK trucks equipped with drum brakes. Hydraulic pressure moves the cylinder piston to apply the brake shoes against the drum.
When matching this part, check the original OE number, cylinder bore and hydraulic connection layout. The MC818230 reference identifies the matching front left application.
![]()
Vehicle Compatibility
| Vehicle | Catalogue Application |
|---|---|
| Mitsubishi Fuso FK415 | Selected Thailand-market configurations, 1990–1995 |
| Mitsubishi Fuso FK417, FK615 and FK617 | Selected configurations listed in the aftermarket catalogue |
Confirm fitment using the chassis number and original cylinder reference. For vehicles with previous axle or brake repairs, compare the removed cylinder with the replacement drawing or photos.
Technical Specifications
| Specification | Details |
|---|---|
| Primary OE Reference | MC818231 |
| Product Type | Hydraulic drum brake wheel cylinder |
| Installation Position | Front axle, right-hand side (RH) |
| Catalogue Bore Reference | 1-5/16 in. (approx. 33.34 mm). Confirm the bore of the quoted unit |
| Mounting | Match the flange profile and mounting hole spacing |
| Hydraulic Connections | Check the inlet thread and port orientation |
| Bleeder Configuration | Confirm the bleeder provision and position against the original cylinder |
Published catalogues show different bore sizes for MC818231. Use the original cylinder specification and the drawing or measurements of the quoted unit to confirm the required size.
![]()
Cross-Reference & Interchange
| Reference | How to Use It |
|---|---|
| MC818231 | Primary OE reference for the front right cylinder |
| MC818230 | Companion reference for the front left cylinder. Order by side |
| SW-M1080 / 120-31080 | Aftermarket comparison numbers. Confirm bore, mounting and hydraulic connections before ordering |
Key Benefits
-
Right-hand application identified by OE number: Helps workshops and distributors order the correct side for a front axle repair.
-
Individual cylinder replacement: Allows the workshop to replace the affected wheel cylinder when inspection confirms the other drum brake components remain serviceable.
-
Fitment checks before ordering: Bore, flange and port details give the buyer specific points to compare with the removed part.
![]()
Frequently Asked Questions (FAQ)
Does MC818231 fit every Fuso FK truck?
It is listed for selected FK415, FK417, FK615 and FK617 applications. Confirm the chassis number, front brake configuration and original cylinder reference.
What is the difference between MC818231 and MC818230?
MC818231 identifies the front right cylinder. MC818230 identifies the corresponding front left cylinder. Vehicle side is determined when facing the direction of travel.
What bore size should I specify?
One catalogue lists 1-5/16 inch, approximately 33.34 mm. Since published listings differ, include the required bore on your enquiry and confirm it against the quoted unit before ordering.
What information should I send for a quotation?
Send the OE number, quantity, truck model and chassis number. If available, include the required bore and photos of the mounting face, hydraulic port and bleeder area.
Request a quotation for the MC818231 front right brake wheel cylinder with your required quantity and vehicle details.
